How many gallons of antifreeze does a ford explorer hold?

The Ford Explorer can hold up to 4 gallons Of antifreeze. Replace coolant for the engine at 100,000 miles or ten years.

ZEREX – G05® 50/50 Ready-to-Use Antifreeze / Coolant, 1 Gallon (Part No. ZXG05RU1)

An average cooling system in a vehicle will hold 5 liters Of engine coolant, which is a mixture of antifreeze and water. You can buy engine coolant in bulk or by the 1 liter however, if you are topping up a reservoir that isn’t empty, use the same brand of antifreeze as last time.

Prestone – DEX-COOL Antifreeze + Coolant: Orange, Extended Life, Ready-to-Use 50/50, 1 Gallon (Part No. AF850)

If the coolant level is low, add the correct coolant to the reservoir (not the radiator itself). You can use diluted coolant by itself, or a 50/50 mixture of concentrated coolant and distilled water. When the coolant rises to the cold fill line, replace the cap and tighten it until you feel it click. Close the hood.

The two coolants should never be mixed together as they do not react well. When mixed together they can form a thick, jelly-like substance that can completely stop all coolant flow which can lead to overheating.

Coolant levels are easy to check – you don’t have to open the radiator cap. Instead, Check the markings on the side of the reservoir. You are good to go if the fluid reaches the “full” marking line. If the fluid is low, remove the radiator cap and add the coolant or a 50/50 mix of coolant/water.

Ford Explorer Fuel Tank Capacity

The 2021 Ford Explorer has a gas tank size of 20.2 gallons, depending on the Explorer model buyers get.

5.2 quarts (with filter). After refill check oil level.