What type of engine do high speed planes use?

A scramjet (supersonic combustion ramjet) is an engine designed for speeds beyond Mach 6, which mixes fuel into air flowing through it at supersonic speeds; it is intended for hypersonic aircraft.

A JT9D turbofan jet engine installed on a Boeing 747 aircraft.

• Jet engines power jet aircraft, cruise missiles and unmanned aerial vehicles. …
• Jet engines have propelled high speed cars, particularly drag racers, with the all-time record held by a rocket car.

Most of today’s airliners are powered by turbofans. In a turbojet all the air entering the intake passes through the gas generator, which is composed of the compressor, combustion chamber, and turbine. In a turbofan engine only a portion of the incoming air goes into the combustion chamber.

For these reasons among others, Turbofan engines Power the vast majority of modern commercial airliners. Boeing was the first company to employ turbofan engines, mounting them to its 737-300 aircraft in the early 1980s.

It was the largest jet engine, until being surpassed in January 2020 by its successor, the 110,000 lbf (490 kN) GE9X, which has a 6 in (15 cm) larger diameter fan. The GE90 however is still more powerful than its successor, the GE9X.
…
General Electric GE90.

It set several airspeed records for jet aircraft. The X-43 is the fastest jet-powered aircraft on record at approximately Mach 9.6.

Airplanes move faster than cars and other vehicles because They have ways of producing a greater amount of thrust. Airplanes can create thrust with propellers, jet engines, and even rocket engines, whereas most cars can only produce thrust by a standard piston engine.

The Pratt & Whitney JT9D high-bypass turbofan Engine was developed for the 747.

#1) Turbojet

One of the most common types of jet engines, turbojet engines work in a similar way as automotive combustion engines. They feature a hollow chamber, known as a combustion chamber, where a precise combination of fuel and air is burned.

Engine Alliance GP7000

Each 737 MAX will use a pair of LEAP-1B jet engines Developed by CFM International, a joint venture between GE Aviation and Safran Aircraft Engines of France.

Powering the Boeing 737 Next-Generation family

The CFM56-7B Is the exclusive engine for the Boeing Next-Generation single-aisle airliner. In total, more than 15,000 CFM56-7B engines have been delivered to power 737 aircraft, making it the most popular engine-aircraft combination in commercial aviation history.

Powering the Boeing 737 Next-Generation family

The CFM56-7B Is the exclusive engine for the Boeing Next-Generation single-aisle airliner. In total, more than 15,000 CFM56-7B engines have been delivered to power 737 aircraft, making it the most popular engine-aircraft combination in commercial aviation history.

A few of the car enthusiasts reading this article might have already guessed the fastest engine in production cars. The Bugatti Chiron Boasts a four turbo, 8.0-litre W16 engine, which is undoubtedly the fastest in the industry. This engine can produce 187.5 horsepower per litre, totalling 1,479 HP.

The Charkhi Dadri Disaster was the single worst mid-air collision in recorded history. On November 12, 1996 Saudi Arabian Airlines flight 763 collided with Kazakhstan Airlines flight 1907 over India. The 349 people on board both planes were killed, with no survivors.

Jet engines typically operate in the range of 8,000 RPM to 9,350 RPM (high pressure compressor).

Lycoming is the engine brand of choice for most aerobatic airplanes — except for the few radials we have out there. If you go with a radial, you might end up with nine cylinders in a Russian Vedeneyev engine.

An afterburner or “reheat jetpipe” is a combustion chamber added to reheat the turbine exhaust gases. The fuel consumption is very high, typically four times that of the main engine. Afterburners are used almost exclusively on supersonic aircraft, most being military aircraft.